Gutter Mount $40

This mounting bracket bolts on to your rafters where they meet the gutter. The flat surface the pole is attached to is curved to go under your tiles.

Please note, this is a quality Hills gutter mount, not a cheap imitation. It will not bend/buckle - even under the most extreme wind and rain. It's perfect for all installations where the dish needs to be rock solid, especially for NSS6 - which is hard to lock onto and usually won't tolerate much play in the mount. If your mount wobbles, you'll see it as picture breakup on screen and the sound will drop out as well.

To enable easy installation of the bracket the distance between the plates that bolt to the rafters can be easily adjusted, as the left hand plate slips inside the right hand mount and can slide to fit as required. (see pic above)

To install this, you need to slide back three to four tiles that sit right by your gutter and then bolt the mount to your rafters with the bolts provided. The tiles then slip back over the top of the mount and you're left with a pole standing up from your gutter.

The end result looks like this:

 

 

 

 

 

For more information, please Email Us.